email

C-TEC CFP Conventional Fire Alarm Training Course

Master the installation, operation, and troubleshooting of C-TEC CFP conventional fire alarm panels — one of the most widely installed fire safety solutions across the UK. Our practical, online training course is purpose-built for fire alarm technicians, electricians, apprentices, and facility managers who need to work confidently with C-TEC conventional systems on site.

We also offer C-TEC XFP Addressable Panel Programming Training for engineers working with addressable fire alarm systems.

Traditional classroom-based C-TEC training typically runs over 1–2 days. Our streamlined online programme condenses the essential skills into over 3 hours of focused, video-led lessons — covering exactly what your team needs to install, wire, test, and diagnose C-TEC CFP panels in the field.

Please note: This training is independently developed by BH Courses. We are not affiliated with or endorsed by C-TEC.

Why Choose Our C-TEC CFP Fire Alarm Training?

Led by an experienced fire alarm technician with hands-on field expertise, this course delivers over 3 hours of condensed, high-impact video lessons focused on the most commonly performed operations for C-TEC conventional panels. Every lesson is built around real-world scenarios — from initial power connection through to fault diagnosis — so you can apply what you learn immediately on site.

Whether you're an established technician adding C-TEC to your skill set or a newcomer building a foundation in conventional fire alarm systems, this course gives you the practical knowledge to work with confidence.

Who Is This C-TEC Fire Alarm Course For?

  • Fire Alarm Technicians & Electricians — Strengthen your expertise with C-TEC CFP conventional panel installation, wiring, and servicing.
  • Beginners & Apprentices — Build a solid, practical foundation for a career in fire alarm system installation and maintenance.
  • Facility Managers & Building Operators — Understand how your C-TEC fire alarm system works, how it is tested, and what to expect during servicing visits.

What You'll Learn: Full Lesson Breakdown

This course covers the complete workflow for C-TEC CFP conventional fire alarm panels — from understanding the panel itself through to wiring every field device and running full diagnostic checks. Here is what each lesson covers in detail:

Understanding the C-TEC CFP Panel

  • Conventional Fire Panel Explained — A comprehensive overview of the C-TEC CFP panel range, its role within a conventional fire alarm system, and where it fits in UK fire safety installations.
  • Live View of Functions and Buttons — A hands-on walkthrough of every front-panel button, indicator LED, and display function so you know exactly what each control does before working on the system.
  • Basic Functions of the Conventional Fire Panel — Learn the core operational modes including normal monitoring, fire condition, fault reporting, silencing alarms, resetting the panel, and using day/night mode.
  • Live View of the Interior — Open up the panel and examine the internal components: PCB layout, terminal blocks, battery connections, fuse locations, and zone card arrangement — essential knowledge for effective servicing.

Wiring and Installation

  • Wiring Power to the Fire Panel — Step-by-step guidance on connecting mains supply and standby batteries, including correct cable selection, fuse ratings, and earth connections to ensure a safe, compliant installation.
  • Wiring Zones to the Conventional Fire Panel (Part 1) — Learn how conventional detection zones are wired back to the panel, including end-of-line resistor placement, cable routing principles, and zone identification.
  • Wiring Zones (Part 2) — Manual Call Points — Install and wire manual call points (break glass units) into a detection zone, covering correct terminal connections and testing the device once wired.
  • Wiring Zones (Part 3) — Smoke and Heat Detectors — Connect smoke detectors and heat detectors to zone circuits, understand two-wire and four-wire detector wiring, and verify correct operation after installation.
  • Wiring Sounders to the Fire Panel (Part 1) — Set up sounder circuits to deliver clear, effective audible alarms across the protected premises, covering sounder circuit wiring, end-of-line supervision, and current draw considerations.
  • Wiring Sounders to the Fire Panel (Part 2) — Continue with advanced sounder wiring configurations, including multiple sounder circuits, phased evacuation setups, and visual alarm device (VAD) integration where applicable.
  • Wiring Zones and Sounders to Fire Panel — A combined practical exercise bringing together detection zone wiring and sounder circuit wiring into a complete, working conventional fire alarm system.

Testing, Diagnostics, and Fault-Finding

  • Conventional Fire Panel Test Function (Part 1) — Use the C-TEC panel's built-in test functions to verify zone integrity, sounder operation, and panel response to fire and fault conditions.
  • Conventional Fire Panel Test Function (Part 2) — LED Test — Run the LED test sequence to confirm all front-panel indicators are functioning correctly — a key step during routine servicing and commissioning.
  • Conventional Fire Panel Diagnosis Tool — Learn to use the panel's diagnostic features to identify common faults such as open circuits, short circuits, and device failures, and understand how to resolve them efficiently on site.

C-TEC CFP Fire Alarm Course Details

  • Duration: 3 hours of condensed video lessons
  • Access: 4 days of unlimited on-demand online access
  • Price: £69
  • Format: Online, self-paced video training
  • Instructor: Experienced fire alarm technician
  • Who it's for: Technicians, electricians, beginners, apprentices, and facility managers

Other Specialist Fire Alarm Programming Training

In addition to Fire Alarm Course MAX — covering 9 fire alarm panels across 37 hours — we offer focused training on specific panel types:

Bonus course included with all multi-panel versions:

Why Learn with BH Courses?

  • Practical, Job-Ready Focus — Every lesson is designed around the tasks you will actually perform on site with C-TEC conventional fire alarm panels.
  • Flexible Online Access — Study at your own pace with 1 day of unlimited on-demand access. No travel, no scheduling conflicts.
  • No Filler — Condensed lessons deliver only the skills and knowledge you need to work confidently and competently.
  • Expert-Led Instruction — Learn from an experienced fire alarm technician with real-world field expertise.
  • Discounts for Multiple Enrolments — Contact us for team pricing when training multiple members of staff.

Enrol Today — C-TEC CFP Fire Alarm Training for £69

Start mastering C-TEC conventional fire alarm panels today. Choose from flexible payment options including online payment or bank transfer (select the offline payment option at checkout).

£69

This course is also included in our comprehensive Fire Alarm Course MAX — covering 9 fire alarm panels across 37 hours for only £499.

START LEARNING NOW

List of All Fire Alarm Courses

View the full list of online fire alarm training courses, pricing, and registration.

ALL FIRE ALARM COURSES